diff --git a/ESPhome/shrimp-vase/.gitignore b/ESPhome/shrimp-vase/.gitignore
new file mode 100644
index 0000000..d8b4157
--- /dev/null
+++ b/ESPhome/shrimp-vase/.gitignore
@@ -0,0 +1,5 @@
+# Gitignore settings for ESPHome
+# This is an example and may include too much for your use-case.
+# You can modify this file to suit your needs.
+/.esphome/
+/secrets.yaml
diff --git a/ESPhome/shrimp-vase/esphome.yaml b/ESPhome/shrimp-vase/esphome.yaml
new file mode 100644
index 0000000..af5e4f9
--- /dev/null
+++ b/ESPhome/shrimp-vase/esphome.yaml
@@ -0,0 +1,54 @@
+esphome:
+  name: shrimp-vase
+  friendly_name: Shrimp Vase Controller
+
+esp32:
+  board: esp32doit-devkit-v1
+  framework:
+    type: esp-idf
+
+logger:
+api:
+ota:
+  password: ""
+  platform: esphome
+
+wifi:
+  ssid: "ItHurtsWhenIP"
+  password: "BKl@3660"
+  manual_ip:
+    static_ip: 192.168.179.20
+    gateway: 192.168.179.1
+    subnet: 255.255.254.0
+  ap:
+    ssid: "Shrimp Vase Fallback Hotspot"
+    password: "12345678"
+
+captive_portal:
+
+web_server:
+  port: 80
+
+switch:
+  - platform: gpio
+    id: switch_light
+    name: "Switch"
+    pin:
+      number: GPIO23 # pin wired to the button pad on the other PCB
+      mode: OUTPUT # <-- only pulls low; otherwise high-impedance
+    restore_mode: ALWAYS_OFF
+
+button:
+  - platform: template
+    name: "Button"
+    on_press:
+      - switch.turn_on: switch_light
+      - delay: 200ms
+      - switch.turn_off: switch_light
+
+sensor:
+  - platform: wifi_signal
+    name: "WiFi Signal"
+    update_interval: 60s
+  - platform: uptime
+    name: "Uptime"