group projects

ESPhome/shelly/.gitignore

@@ -0,0 +1,5 @@
+# Gitignore settings for ESPHome
+# This is an example and may include too much for your use-case.
+# You can modify this file to suit your needs.
+/.esphome/
+/secrets.yaml

ESPhome/shelly/shelly-1.yaml

@@ -0,0 +1,88 @@
+substitutions:
+  device_name: "Slaapkamer Lamp"
+
+esphome:
+  name: shelly1-slaapkamer
+  platform: ESP8266
+  board: esp01_1m
+
+wifi:
+  ssid: !secret wifi_ssid
+  password: !secret wifi_password
+  manual_ip:
+    static_ip: 192.168.179.28
+    gateway: 192.168.178.1
+    subnet: 255.255.254.0
+    dns1: 1.1.1.1
+    dns2: 8.8.8.8
+  power_save_mode: none
+
+captive_portal:
+
+logger:
+
+api:
+
+ota:
+
+web_server:
+  port: 80
+
+text_sensor:
+  - platform: wifi_info
+    ip_address:
+      name: ${device_name} IP
+  - platform: wifi_info
+    bssid:
+      name: ${device_name} BSSID
+  - platform: template
+    name: "${device_name} WiFi Strength"
+    update_interval: 60s
+    lambda: |-
+      float rssi = id(wifi_signal_sensor).state;
+      if (rssi <= -80.0) {
+        return std::string("WEAK");
+      } else if (rssi <= -70.0) {
+        return std::string("OK");
+      } else if (rssi <= -60.0) {
+        return std::string("GOOD");
+      } else {
+        return std::string("PERFECT");
+      }
+
+sensor:
+  - platform: uptime
+    name: ${device_name} Uptime
+
+  - platform: wifi_signal
+    name: ${device_name} WiFi Signal
+    update_interval: 60s
+    id: wifi_signal_sensor
+
+
+switch:
+  - platform: gpio
+    name: ${device_name}
+    pin: GPIO4
+    id: shelly_relay
+    restore_mode: ALWAYS_OFF
+  - platform: "restart"
+    name: "${device_name} Restart"
+
+binary_sensor:
+  - platform: gpio
+    name: ${device_name} Input
+    pin:
+      number: GPIO5
+    filters:
+      - delayed_on_off: 50ms
+    id: button
+
+time:
+  - platform: sntp
+    id: sntp_time
+    timezone: Europe/Brussels
+    servers:
+      - time.google.com
+      - 0.be.pool.ntp.org
+      - 3.be.pool.ntp.org