esphome:
  name: bedscale

esp8266:
  board: d1_mini

# Enable logging
logger:
  level: DEBUG

# Enable Home Assistant API
api:
  password: ""

ota:
  password: ""
  platform: esphome

wifi:
  ssid: "ItHurtsWhenIP"
  password: "BKl@3660"
  manual_ip:
    # Set this to the IP of the ESP
    static_ip: 10.0.1.50
    # Set this to the IP address of the router. Often ends with .1
    gateway: 10.0.0.1
    # The subnet of the network. 255.255.255.0 works for most home networks.
    subnet: 255.255.254.0

  # Enable fallback hotspot (captive portal) in case wifi connection fails
  ap:
    ssid: "Bed-Scale Fallback Hotspot"
    password: "bINLLate9rIA"

captive_portal:

# sensor:
#   - platform: hx711
#     name: "HX711 Value"
#     dout_pin: D4
#     clk_pin: D3
#     gain: 128
#     update_interval: 3s

globals:
  - id: constant_weight
    type: float

sensor:
  - platform: hx711
    id: bed
    internal: true
    dout_pin: D4
    clk_pin: D3
    update_interval: 3s
    gain: 128
    filters:
      - calibrate_linear:
          - 2290200 -> 0
          - 2856500 -> 50
    on_value:
      - if:
          condition:
            - lambda: |-
                static float last = 0.0;
                float diff = x - last;
                last = x;
                return x < 10.0 && diff < 1.0 && diff > - 1.0;
          then:
            - lambda: "id(constant_weight) = x;"

  - platform: template
    name: Bedscale
    icon: mdi:weight-kilogram
    update_interval: 3s
    unit_of_measurement: kg
    lambda: "return id(bed).state;"
    filters:
      - lambda: "return x - id(constant_weight);"
      - lambda: "return x >= 10.0 ? x : 0;"
      - delta: 0.5